Author Archives: VK5GR

AREG March Foxhunt: THIS FRIDAY 6.30pm

Posted on by

The next foxhunt run by AREG will be held this Friday, March 12th. The hunt will again start from Lockleys Oval. Hounds are asked to gather from 6.15pm and will be released at 6.30pm. Three foxes will operate on the 144MHz and 439MHz bands from somewhere in the Adelaide metropolitan area.

Team ZSN at the Mt Gambier Foxhunting Championships

The frequency of the fox(es) will be broadcast on AREG’s VK5RSB Summertown 70cm repeater on 439.900 MHz (-5MHz) a few minutes before 6:30pm with all invited to liaise and discuss their progress on the repeater throughout the night. (Remember VK5RSB requires a 91.5Hz CTCSS tone on its input).

Horus 55: Digital ATV Flight an outstanding success!

Posted on by

It is late and we are still processing telemetry and video streams but we thought we would post a quick note to say that Horus 55 was an absolute success. Stories are coming in from across the region from people who successfully watched the Amateur TV signal live over 80-90km away.

Reports also of the primary 434MHz 4FSK telemetry beacon being received 700km away in Melbourne plus the LoraWAN Things Network gateways over 560km away reporting packets from the experimental LoraWAN payload on 923MHz ISM.

We will post a long form story in the next day, but here is one of the amazing frame grabs from the TV transmitter just after burst. As the TV payload started to tumble it sent back this frame showing all of the telemetry transmitters and the parachute in one shot!

Finally here was the moment the chase and recovery crew picked up the payload.

Project Horus: Live ATV Flight Path Prediction & YouTube Live-stream Link

Posted on by

UPDATE: The launch has been set for Sunday 10AM ACDST, from the Auburn Oval. 

The flight crew are starting to get flight-path predictions for this coming weekend, though the models are quite inaccurate this far ahead of the prediction time. Currently a launch on Sunday looks promising from Auburn. This would put the balloon within 80-90km of Adelaide for much of it’s flight, which should allow many stations to be within direct decoding range of the Digital-ATV transmission on 445MHz.

These predictions *will* change over the next few days so this is just a preliminary plan at this stage. We expect to be able to make a commitment on the launch date and time most likely Thursday or Friday this week.

As a reminder, the following launch dates/times are planned:

  • PRIMARY: Sunday 7th March, 10AM (ACDT) – (2330z 6th March UTC)
  • BACKUP #1: Monday 8th March, 10AM (Public Holiday!)
  • BACKUP #2: Sunday 14th March, 10AM

For those without D-ATV receiving equipment, AREG is going to attempt to stream the received ATV pictures via Hayden VK7HH’s HamRadioDX YouTube channel at the same time. You will find the link to the YouTube broadcast here:

Digital ATV Transmission – How to Receive?

If you want to get involved through receiving the D-ATV signal direct from the balloon on 445MHz take a look at the How-To Guide being maintained by Mark VK5QI:

The setup guide is available here: docs.google.com/D-ATV_Setup_Guide

433MHz Telemetry Tracking – How to Receive?

Amateurs in the Adelaide and Central SA region are also encouraged to get involved with the flight through receiving and uploading flight telemetry from our 70cm band tracking beacons. Every piece of telemetry data is valuable to the flight tracking and recovery teams so if you can help join the distributed receiver network to collect that data you will be making an important contribution to the project!

The telemetry beacon will operate on 434.200MHz

If you want to have a go receiving the telemetry from this flight, you’ll need a SSB-capable 70cm receiver (or a SDR), and the horus-GUI telemetry decoder software ( github.com/projecthorus/horus-gui ).

A brief guide on setting this up is available here: github.com/projecthorus/horusdemodlib/wiki/1.1-Horus-Rx

Project Horus: D-ATV Receiving – Test Transmissions this weekend – HOWTO Get Involved!

Posted on by

The D-ATV test flight of Project Horus is getting closer. This weekend Mark VK5QI will be up on the hills face overlooking Adelaide and will run the balloon transmitter from the ground to give stations a chance to configure their receiving equipment before the main event on Sunday March 7th.

UPDATE: This event has now concluded. Eight stations were able to get setup to receive the DVB-S signals. We are still on track to launch this coming weekend, with the planned launch date still being Sunday the 7th of March at 10AM. If weather conditions do not permit a launch on this date, Monday the 8th of March (a public holiday in VK5) is the first backup date, with a launch the following weekend being the second backup. The launch site is still TBD (either Auburn, Two Wells, or Mt Barker).

Mark will be available live on the air for people to test their receiving systems at the following times and places this coming weekend:

– SATURDAY 27th Feb

  •    – ~11AM Start. ~1 hr duration.
  •    – TX Location: VK5SFA QTH (Woodforde, SA)
  •    – Coordination: VK5RSA 70cm

– SUNDAY 28th Feb

  •   – ~11AM start. ~1 hr duration.
  •   – TX Location: Para Power Station (Blacktop Hill Road)
  •   – Coordination: VK5RSA 70cm.

The setup guide is available here: docs.google.com/D-ATV_Setup_Guide

NOTE: There may be an update to SDRangel before the launch. The new version will display signal MER (Modulation Error Rate) information, but has not been released yet.

If you missed the AREG presentation on what was required to to receive the balloon, the video is available via the HamRadio DX Youtube channel (Thanks Hayden!)

Project Horus Balloon Project: Digital ATV DVB-T Terrestrial Testing – Success!

Posted on by

Today Mark VK5QI took the Balloon ATV transmitter out for a terrestrial test. He carried out line-of-sight testing of the DVB-S payload from BlackTop Hill to the AREG remote site near Tarlee – a distance of 54km!

First test – could he see the signal on the SDR up at the site (RTLSDR, Diamond X-50, no preamp)… yes!

Next, Mark dumped some samples with rtl_sdr, then transferred them back to his laptop. He processed them through leandvb – and got video!!! A bit of fading, but for an omni receiver with no preamp, this is a pretty damn good result!

… and here’s some of the raw video

The MER as reported by leandvb was around 8-11 dB, right on the edge of what is decodable. Still, with such a basic system, a good result!

Based on the path, it is estimated to give us a working range of about 150km from the balloon given a receiving station with 15dBi gain and a good low noise preamplifier.

Stay tuned for more information on how to receive and decode the Digital ATV signal and save the date – we hope to launch the transmitter into the stratosphere on Sunday March 7th. (We also plan on streaming the event on Youtube).

For those who missed it late last year here is a bit more information about the Balloon ATV payload and some minimum signal testing that was carried out.

Australian Facebook News Blackout: Subscribe to our Announce Mailing List instead!

Posted on by

The ongoing dispute in the national media landscape between Facebook and the Federal Government has resulted in AREG no longer being able to directly re-post our own information, news and events from our Website.

So you dont miss out, why not consider joining our “AREG News Mailing List”?

Simply send an email to:
announce-subscribe@areg.org.au

 

Reminder: AREG Meeting this Friday – D-ATV from a Balloon 30km up!

Posted on by

This is a reminder that this Friday’s AREG meeting will be held at the Fulham Community Centre, Phelps Court, Fulham. Doors open at 7.15pm Central summer time with the presentation planned to start at 7.45pm.

Our guest speaker will be Mark VK5QI. He will introduce you to the new Digital ATV payload and what you need to be able to receive and decode it. More information on the presentation is available (here).

Members who can’t attend in person will be able to access the meeting via Zoom (a link will be sent on the members mailing list on Thursday). Non members will be able to watch the Youtube Livestream thanks to Hayden VK7HH and his HamRadio DX channel.

The times are:

  • 7.45pm ACDT (SA)
  • 8.15pm AEDT (NSW, ACT, VIC, TAS)
  • 7.15pm AEST (Queensland)
  • 6.45pm ACST (NT)
  • 6.15pm AWST (WA)
  • 0915Hrs UTC

We hope to see you there!